Full Automatic Face Mask Production Line

It consists of a host (mask forming machine) plus two ear band welding machines (outer ear band), connected by a one-to-two transmission line. It can realize the full-automatic production process from coil feeding, folding and pressing, and slitting, ear band feeding machine welding, and unloading.

 

Staffing requirements: 2 operators

Support mask production type: flat non-woven mask 3/4 layer

 

Capacity: 4000-6000 pcs/h

Machine size: about 6400*3200*1680mm

Power: 11KW

Equipment commissioning: commissioning cycle is 1-2 days, online support is provided

 

1. The mask body machine

-Mask function introduction

The one-to-two full-automatic flat mask production line adopts advanced design, only the production raw materials need to be installed on the feeding rack to complete the modulation

After that, the machine realized automatic production, which required only one person to operate the packaging, and fully realized the entire automated production. The equipment adopted ultrasonic welding, which was beautiful in appearance, hygienic and environmentally friendly.

The output is 110-160 minutes, the length of the nose bridge strip is adjustable, and the product size error is ± 1mm. According to the needs, some molds can be replaced to achieve a variety of mask sheets. This machine can produce a variety of non-woven masks, smooth cloth Masks, gauze masks, activated carbon masks, double nose line masks, etc. Support 1-4 layers of non-woven mask sheet production.

-Technical parameters of mask body machine

Equipment size: 3345*630*1830mm

Voltage: AC 220V, 50-60HZ

Production efficiency: 110～160 pieces/min

Power: 2.7KW

 

2. The external ear belt machine

-Function introduction

The equipment uses ultrasonic welding to fuse the elastic bands to the inner sides of the two ends of the mask body. It is the last processing step of the production of inner ear masks. Only one operator needs to place the mask body piece by piece in the mask plate. The device completes automatically. This machine adopts servo and step drive, with precise transmission and adjustable speed.

-Technical parameters of external ear strap machine

Equipment size: 1915*855*1780mm

Voltage: AC 220V, 50-60HZ

Production efficiency: 50～60 pieces/min

Power: 2.7KW

 

3. Sample pictures